The Applied Electronic Technology program provides training in complex electronic equipment. These complex pieces of electronic equipment are installed, maintained, and repaired by electrical and electronics installers and repairers.
Salina Tech’s 18-month program can prepare you for career opportunities in: Career Opportunities are available in: Aircraft Industry, Computer Industry, Medical Electronics, Automated Manufacturing, Cross-Functional Technician, Military Bio-Medical Technician, Industrial Automation, Mobile Communications, Broadcast Engineer, Industrial Electronics, Oil and Gas Industry, Business Machine Servicing, Industrial Equipment Servicing, Telephone Industry, Communications Technician, Instrumentation/Process Controls, Water/Wastewater Treatment Technician.
| Applied Electronic Technology Certificate | ||||
| First Semester | Credits | Third Semester | Credits | |
| MAT 150 College Algebra | 3 | AET 235 Fundamentals of Communications | 4 | |
| AET 105 DC Circuits | 5 | ELT 220 Motor Control | 4 | |
| ENV 102 Safety Orientation (OSHA 10) | 1 | AET 250 Introduction to Programming | 4 | |
| AET 115 Digital Circuits | 4 | ENG 100 Technical Communications | 3 | |
| CAD 125, WEL 105, or MTT 115 | 2-4 | |||
| TOTAL CREDITS: | 15-17 | TOTAL CREDITS: | 15 | |
| Second Semester | Credits | Fourth Semester | Credits | |
| MAT 155 Plane Trigonometry | 2 | AET 230 Programmable Logic Controllers | 4 | |
| AET 106 AC Circuits | 5 | AET 220 Microcontrollers | 5 | |
| AET 110 Solid State Fundamentals | 5 | AET 280 Applied Electronic Internship | 3 | |
| AET 116 Digital Systems | 4 | |||
| TOTAL CREDITS: | 16 | TOTAL CREDITS: | 12 | |
| TOTAL CERTIFICATE CREDITS: | 56 | |||
Associate of Applied Science Degree: 63 Credits. To complete the Associate of Applied Science Degree, select 7 additional credits from the General Education requirements found in the Degree and Certification Information section. Visit with your instructor or the Director of Student Services for possible options.
MAT 150 College Algebra, 3 credits
Students will learn how to interpret mathematical symbols and notations, simplify expressions, factor polynomials, solve equations (including absolute value, quadratic and systems of linear equations), perform operations on radical expressions, write equations of lines and evaluate functions.
AET 105 DC Circuits, 5 credits (Prerequisite MAT 150)
This course is an introduction to electronic components, symbols, and the global language used in electronics. Students receive Hands on and Lecture Based instruction simultaneously with practical experience reading schematic diagrams, analyzing and constructing circuits, and test procedures of electronic operating characteristics used in DC electronics and electricity. This course will also introduce students to electronic components, symbols, soldering techniques, and the global language used in electronics.
ENV 102 Safety Orientation (OSHA 10), 1 credits.
During this course students are familiarized with a wide range of integrated devices, their characteristics and the circuits in which they are used. Students receive practical experience on integrated device characteristics, how they are used in the design of circuits and troubleshooting problems.
AET 115 Digital Circuits, 4 credits. (Prerequisite none)
During this course students are familiarized with a wide range of digital devices, their characteristics and the circuits that they are used in. Students will receive practical experience on digital device characteristics, how they are used in the design of circuits and troubleshooting problems. This course will provide the foundation used to understand advanced digital systems.
CAD 125 Drafting Technology, 4 credits.
Basic concepts and skills of mechanical drawing, use and knowledge of drafting tools, supplies, and equipment are covered. Mechanical drafting fundamentals will be presented, along with an explanation of standard drafting practices are taught. Topics covered will include drafting equipment, media, sketching, lettering and lines, geometric construction, multi-views, auxiliary views, sections, pictorials, and dimensioning. Practical and realistic math problems associated with drafting topics will also be covered.
WEL 105 Welding Theory, 2 credits.
This course prepares students to work in industrial welding shop settings. Students study the cause and prevention of accidents in shop and industry. First aid and emergency procedures are covered. Safety, housekeeping, proper use and maintenance of tools and equipment are emphasized.
MTT 115 Precision Measurement, 2 credits.
Students will learn to define measurement terms, systems, and principles, as well as identify, describe, and care for semi-precision/precision measurement tools. The student will learn to measure using precision instruments such as micrometers, gage blocks, verniers, dial indicators, and dial calipers.
MAT 155 Plane Trigonometry, 2 credits. (Prerequisite MAT 150)
The purpose of this course is to introduce and study the properties of trigonometric functions. Trigonometric functions are used in two ways, in problem solving situations using right triangles as models, and to represent periodic behavior. Attention is devoted to the use of trigonometric functions in engineering and the sciences.
AET 106 AC Circuits, 5 credits (Prerequisite MAT 155)
Students receive Hands on and Lecture Based instruction simultaneously with practical experience reading schematic diagrams, analyzing and constructing circuits, and test procedures of electronic operating characteristics used in AC electronics and electricity. This course will provide an in depth coverage of AC signal characteristics, Reactive circuits, Filtration, and AC Circuit analysis. A brief introduction to three phase theory will be included as time permits.
AET 110 Solid State Fundamentals, 5 credits
Solid State Fundamentals will introduce and characterize semiconductor devices including diodes, transistors, operational amplifiers, silicon controlled rectifiers, and Triacs. Power supply design and amplifier characteristics will be emphasized throughout the class.
AET 116 Digital Systems, 4 credits, (Prerequisite AET 115)
During this course students are familiarized with a wide range of digital devices, their characteristics and the circuits that they are used in. Students will receive practical experience on digital device characteristics, how they are used in the design of circuits and troubleshooting problems. Significant time will be spent developing an understanding of sequential logic, memory devices and analog/digital conversion methods.
AET 235 Fundamentals of Communications, 4 credits (Prerequisite AET 106/Co-requisite EL 110)
The communication spectrum has been greatly expanded by the use of “wireless” communication. This phase is designed to teach the fundamentals and intermediate techniques of Radio Frequency (RF) communications. This course introduces the student to methods of generating and receiving AM (amplitude modulated) and FM (frequency modulated) signals, antennas, transition lines, and satellite communications.
ELT 220 Motor Control, 4 credits (Prerequisite AET 110 and AET 115)
This course is designed to give the student a valuable background in plant power distribution, various types of pilot control devices, AC and DC motors, electrical and motor control circuits including wiring methods, Variable Frequency Drives (VFD)s, and troubleshooting these devices and controls. A control background can expand into related fields of industrial controls, manufacturing automation, security systems, and water / waste treatment technologies.
AET 250 Introduction to Programming, 4 credits (Prerequisite MAT 150 – College Algebra)
This course introduces computer programming and problem solving in a structured program logic environment using the C programming language. Topics include language syntax, data types, program organization, and problem solving methods, algorithm design, and logic control structures. Upon completion, students should be able to manage files with operating system commands, use top-down algorithm design, and implement algorithmic solutions in a programming language.
ENG 100 Technical Communications, 3 credits. (Prerequisite CSA 105)
This course provides an introduction to professional and technical writing appropriate to students’ field of study and future professional lives. It emphasizes thorough practice in the organization and writing of technical documents, locating and using appropriate information, communicating with others, and career seeking skills.
AET 230 Programmable Logic Controllers, 4 credits (Prerequisite ELT 220)
This course gives students a background in programmable logic controller theory, implementation, and troubleshooting.
AET 220 Microcontrollers, 5 credits (Prerequisite AET 250)
This course introduces the student to concepts of microprocessor programming (including Assembly Language) and gives the student a foundation in microprocessor applications. This phase presents a working knowledge of microprocessor programming and interfacing along with an understanding of digital-to-analog conversion, analog-to-digital conversion, analog signal conditioning, sensors, transducers, and many other facets.
AET 280 Applied Electronic Internship, 3 credits (Prerequisite 4th semester standing)
This course will offer the student an opportunity to work with local employers in the electronics industry to build their skills and to network with electronics professionals. Each student will be expected to provide expertise to the employer and to complete weekly logs of internship activity.
